Brokerage Listings

BackPrint Listing

Charlie's Tuna 

Priced to sell!

  • Boat Name: Charlie's Tuna
  • Year: 1999
  • Current Price: US$ 309,900
  • Located in Plymouth, MA
  • Hull Material: Aluminum
  • Engine/Fuel Type: Twin diesel
  • YW# 1821-3143901



photo of  62' Custom 62 Breen Custom Aluminum
Photo 1
photo of  62' Custom 62 Breen Custom Aluminum
Photo 2
photo of  62' Custom 62 Breen Custom Aluminum
Photo 3
photo of  62' Custom 62 Breen Custom Aluminum
Photo 4
photo of  62' Custom 62 Breen Custom Aluminum
Photo 5
photo of  62' Custom 62 Breen Custom Aluminum
Photo 6
photo of  62' Custom 62 Breen Custom Aluminum
Photo 7
photo of  62' Custom 62 Breen Custom Aluminum
Photo 8
photo of  62' Custom 62 Breen Custom Aluminum
Photo 9

Additional Specs, Equipment and Information:


Boat Name
Charlie's Tuna

Engines
Total Power: 1400 HP

Engine 1:
Engine Brand: Lugger
Year Built: 2013
Engine Model: L-6140AL2.3
Engine Type: Inboard
Engine/Fuel Type: Diesel
Location: Starboard
Engine Hours: 375
Drive Type: V Drive
Engine Power: 700 HP
Engine 2:
Engine Brand: Lugger
Year Built: 2013
Engine Model: L-6140AL2.3
Engine Type: Inboard
Engine/Fuel Type: Diesel
Location: Port
Engine Hours: 375
Drive Type: V Drive
Engine Power: 700 HP



Builders description

Charlie's Tuna Specifications:

General:

 Year Built: 1999

 Owner/Builder: Charles S. Breen

 Specification Hull:

LOA: 62' 0"

 LWL: 51' 0"

 Beam: 16' 4"

 Draft: 4' 0"

 Displacement: 52,000 lbs (Dry)

Fuel Capacity: 1500 gal.

Hull Plating: .25" 5058 aluminum

 Keel: .5"x 6" 6061 aluminum

 Ribs: .5"x 4" 6061 aluminum (24" oc)

 Stringers: .5" x 1.5" 6061 aluminum (12" oc)

 Transom: .5" 5058 aluminum

 Engine Beds: 3.5"x 8" x .375" 6061 aluminum

Dead Rise: 19 degrees

 Chines: Single 8" hard

 Welding: All seams, triple TIG welded outside, Triple MIG welded inside with matched hull alloy.

Specification Running Gear:

Engines: Twin Lugger-L6140AL2.3, 6 cylinder diesels, 700hp @ 2100 rpm (each) Serial Number: Port: 1401-2567, Stb. 1401-2568

Engine Hours: Port: less then 400 Stb.: less then 400

Transmission: Twin Disk Model: MG5114IV 1.8:1, 14 degree dn. angle; Serial No.: Port: TBD Stb.: TBD

Shafts: 2.75"

 Shaft Seals: PSS Dripless

 Shaft Struts: 1.75 SS316 with 2.75x10" Cuttlas Bearings

Propellers: 30x34" 5 Blade, Katapult

Rope Cutter: Shaft Shark SS700 (2.75")

Performance: 28 knots WOT at 2100rpm (600 gal fuel load)

Fuel Consumption: 26 gph per engine at WOT

Rudder Shafts: 2.5" SS316 with dual cuttlas support and O-Ring seal.

Rudders: Foil Shaped welded SS316 30"x14"

Thru Hull fittings: Marelon, reinforced poly-carbonate


Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


photo of  Custom 62 Breen Custom Aluminum
Photo 10
photo of  Custom 62 Breen Custom Aluminum
Photo 11
photo of  Custom 62 Breen Custom Aluminum
Photo 12
photo of  Custom 62 Breen Custom Aluminum
Photo 13
photo of  Custom 62 Breen Custom Aluminum
Photo 14
photo of  Custom 62 Breen Custom Aluminum
Photo 15
photo of  Custom 62 Breen Custom Aluminum
Photo 16
photo of  Custom 62 Breen Custom Aluminum
Photo 17
photo of  Custom 62 Breen Custom Aluminum
Photo 18
photo of  Custom 62 Breen Custom Aluminum
Photo 19
photo of  Custom 62 Breen Custom Aluminum
Photo 20
photo of  Custom 62 Breen Custom Aluminum
Photo 21
photo of  Custom 62 Breen Custom Aluminum
Photo 22
photo of  Custom 62 Breen Custom Aluminum
Photo 23
photo of  Custom 62 Breen Custom Aluminum
Photo 24
photo of  Custom 62 Breen Custom Aluminum
Photo 25
photo of  Custom 62 Breen Custom Aluminum
Photo 26
photo of  Custom 62 Breen Custom Aluminum
Photo 27
photo of  Custom 62 Breen Custom Aluminum
Photo 28
photo of  Custom 62 Breen Custom Aluminum
Photo 29
photo of  Custom 62 Breen Custom Aluminum
Photo 30
photo of  Custom 62 Breen Custom Aluminum
Photo 31
photo of  Custom 62 Breen Custom Aluminum
Photo 32
photo of  Custom 62 Breen Custom Aluminum
Photo 33
photo of  Custom 62 Breen Custom Aluminum
Photo 34
photo of  Custom 62 Breen Custom Aluminum
Photo 35
photo of  Custom 62 Breen Custom Aluminum
Photo 36
photo of  Custom 62 Breen Custom Aluminum
Photo 37
photo of  Custom 62 Breen Custom Aluminum
Photo 38
photo of  Custom 62 Breen Custom Aluminum
Photo 39
photo of  Custom 62 Breen Custom Aluminum
Photo 40
photo of  Custom 62 Breen Custom Aluminum
Photo 41
photo of  Custom 62 Breen Custom Aluminum
Photo 42
photo of  Custom 62 Breen Custom Aluminum
Photo 43
photo of  Custom 62 Breen Custom Aluminum
Photo 44



Last Revised: Feb 14, 2019

For more details or questions about other listings please contact Capt. Buck Berry at (781) 834-9790

Contact South Shore Dry Dock Marine, Inc..

612 Plain Street
Marshfield, MA 02050 United States
Tel 781-834-9790
Fax (781) 834-3751
Contact Us
© 2012 South Shore Dry Dock